PRE ORDER Bambu Lab H2C Combo

The Bambu Lab H2C Combo is a multi-material 3D printer featuring hotend-change multi-material printing, minimal purge waste multi-color printing, precise and fast inductive nozzle heating, a closed-loop servo extruder, and full filament path AI error detection. It features 350°C nozzles, 65°C active heated chamber, and a 330 × 320 × 325 mm³ total volume for two nozzles. It also supports an optional 10W/40W laser and cutting module.

Key Features

• Hotend Change Multi-material Printing

• Minimal Purge Waste Multi-Color Printing

• Precise & Fast Inductive Nozzle Heating

• Close-loop Servo Extruder

• Full Filament Path AI Error Detection

• 350°C Nozzles

• 65°C Active Heated Chamber

• Optional 10W/40W Laser and Cutting Module

• 330 × 320 × 325 mm³ Build Volume

Machine Specifications

The machine dimensions and 32.5 kg net weight are confirmed by Bambu Lab's technical specifications.

Multi-Material & Multi-Color Printing

The H2C uses a hotend-change system for multi-material and multi-color printing, helping minimize purge waste during filament changes. Bambu Lab states that the Vortek Hotend Change System supports interchangeable hotends and can support printing with multiple filaments.

• Hotend Change Multi-material Printing

• Minimal Purge Waste Multi-Color Printing

• Dual nozzle printing

• Total volume for two nozzles: 330 × 320 × 325 mm³

• Built-in filament cutter

Toolhead

• Extruder Gear: Hardened Steel

• Nozzle: Hardened Steel

• Maximum Nozzle Temperature: 350°C

• Supported Nozzle Diameters: 0.2 mm / 0.4 mm / 0.6 mm / 0.8 mm

• Filament Cutter: Built-in

• Filament Diameter: 1.75 mm

• Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor

Heatbed

• Build Plate Material: Flexible Steel Plate

• Included Build Plate: Textured PEI Plate

• Supported Build Plates: Textured PEI Plate, Engineering Plate

• Maximum Heatbed Temperature: 120°C

Active Heated Chamber

The H2C features active chamber heating with a maximum chamber temperature of 65°C, providing controlled chamber conditions for printing with higher-temperature materials.

Air Filtration

The H2C features an air purification system consisting of:

• G3 Pre-filter

• H12 HEPA Filter

• Granulated Coconut Shell Activated Carbon

Smart Detection & Monitoring

• Full Filament Path AI Error Detection

• Filament Run Out Sensor

• Filament Tangle Sensor

• Filament Odometry

• Power Loss Recovery

• Live View Camera

• Nozzle Camera

• BirdsEye Camera

• Toolhead Camera

• Door Sensor

Speed & Performance

• Maximum Toolhead Speed: 1000 mm/s

• Maximum Acceleration: 20,000 mm/s²

• Maximum Hotend Flow Rate: 40 mm³/s

Optional Laser & Cutting Module

The H2C supports an optional 10W/40W Laser and Cutting Module, expanding the machine's capabilities beyond 3D printing.

Warranty

1-Year Warranty

• Parts and Service

3-Month Warranty

• Consumables

Terms & conditions apply.

Summary

The Bambu Lab H2C Combo is a high-performance multi-material 3D printer with a 330 × 320 × 325 mm³ total working/build volume, 492 × 514 × 626 mm machine size, and 32.5 kg machine weight. It features hotend-change multi-material printing, minimal purge waste, 1000 mm/s maximum toolhead speed, 20,000 mm/s² maximum acceleration, 350°C maximum nozzle temperature, and 65°C active chamber heating. It also supports an optional 10W/40W laser and cutting module.